08071596348
08071596348
Typical designs are detailed below:
1. Patching and repair mortar: 20kgs GP Cement + 60kgs
grade 16/30 sharp sand + 4 litres Nitobond SBR + 3 litres
(approximately) clean water. Yield 38 litres. Recommended
thickness: 6mm - 40mm
2. Heavy-duty floor screed: 20kgs GP Cement + 30kgs
3mm to 6mm crushed rock + 30kgs grade 16/30 sharp
sand + 2.5 litres Nitobond SBR + 2.5 litres (approximately)
clean water. Yield 37 litres. The screed should be of a
semi-dry cohesive consistency. Recommended thickness:
10mm - 40mm
3. Render: 20kgs GP Cement + 60kgs grade 16/30 sharp
sand + 2.5 litres Nitobond SBR + 2.5 litres (approximately)
clean water. Yield 37 litres. The render should be of a
semi-dry cohesive consistency. Recommended thickness:
6mm - 9mm
4. Bonding mortar for tiles, etc: 20 kgs GP Cement + 50kgs
grade 16/30 sharp sand + 4 litres Nitobond SBR + 3 litres
(approximately) clean water. Yield 33 litres. Water is
adjusted to give a firm mortar. Support where necessary
until the mortar is set. Recommended thickness: 6mm to
40mm