Fosroc Concure 1315 Acrylic Curing and Sealing Compound for Concrete Floors (200 Ltr)

Most curing compounds do one job and then they're done. They hold the water in while the slab cures, and after that they're either worn off or in the way. A concrete floor usually needs more than that. It needs curing while it's fresh, then sealing and dustproofing so it stops shedding fine powder and stands up to traffic and spills. Fosroc Concure 1315 covers all of that in one acrylic compound.

It's a single-component, acrylic polymer based product you spray on at 5 to 10 square metres a litre. On fresh concrete it forms a clear film that retains moisture for proper curing and cuts shrinkage cracking. On floors it seals the surface and stops dusting, and the cured film resists UV without yellowing, takes foot traffic, and stands up to abrasion and a wide range of chemicals and acids. It works on freshly placed concrete and on existing concrete alike, and it meets ASTM C1315.

That makes it a practical single specification for floors and slabs in workshops, warehouses, plants and similar surfaces, where you want the concrete cured properly and left hard-wearing and dust-free. When a coating is planned later, Concure 1315 can be overcoated with water and solvent based acrylics, epoxies and polyurethanes, so it doubles as the curing and sealing base under a floor coating system.

For concrete that has to cure, seal and stay dust-free, and resist what gets spilt on it, Fosroc Concure 1315 is the acrylic curing and sealing compound that does the lot in one application.